Shopping Cart
Bathroom without tile joints
A continuous surface limits spatial division and facilitates routine maintenance compared to numerous cement joints.
Bathroom Set - Aqua Nature Microcement
How to order?
- Select a shade of microcement.
- Enter the required area in m².
- Add the set to your basket and check the final price including discount.
Quantity discount up to 20% is applied automatically in the basket from £170 (5 000 Kč).
Sets are sold precisely according to the required area in m² – so you don’t pay unnecessarily for surplus material.
Complete microcement set from primer to lacquer.
- Proven system CimentArt from Spain
- seamless surface without demolition
- suitable even on existing tiles
- complete system including 2K PU lacquer
- low thickness approx. 1.5–2 mm
- Czech technical support
- application videos, manuals, technical data sheets
- certified according to Emicode EC1 PLUS
Not sure about the shade? Buy a ready sample HERE.
Automatická sleva v košíkuMnožstevní sleva až 20 % se odečte automaticky v košíku již od Kč5,000.
Aqua Nature · complete bathroom system · walls, floors and showers
Seamless concrete coating for the bathroom
Complete microcement system CimentArt Aqua Nature for bathroom walls, floors, and shower enclosures. It creates a continuous surface without tile joints, has a natural mineral appearance and is suitable for both new builds and renovations due to its thin layer.
- Walls, floors and showers
- Non-absorbent coating
- Thickness about 2 mm
- Complete set from 1 m²
Complete bathroom solution
Why choose Aqua Nature for your bathroom
This system allows unifying walls, floors and shower enclosure in a single material. There are no tile joints, creating a calmer, more spacious and architecturally cleaner bathroom space.
Non-absorbent coating
The individual system layers are designed for moist environments and after sealing with Gela Cryl TR100 and 2K PU lacquer, the surface is suitable for shower enclosures.
Renovation without unnecessary demolition
With correct preparation, the system can be applied on a firm existing tile or flooring, significantly reducing demolition work.
Exceptionally low emissions
EMICODE® EC1 PLUS
The Aqua Nature system composition was tested as a complete flooring layer including final protection. The result meets the strictest EMICODE® EC1 PLUS emission classification.
Emission test result after 28 days
Measured value < 10 µg/m³ TVOC after 28 days
EC1 PLUS limit ≤ 60 µg/m³ TVOC after 28 days
Less than one sixth of the permitted limit
The measured total volatile organic compounds content was significantly below the limit set for the EMICODE® EC1 PLUS emission class.
Measurement report available on request.
System use
One solution for the entire bathroom
We recommend Aqua Nature wherever you want to create a continuous mineral surface without traditional tiling, unify multiple bathroom areas and maintain a thin new layer.
- bathroom and toilet walls
- shower enclosures and niches
- bathroom floors
- around basins and bathtubs
- firm ceramic tiles and flooring
- concrete and cement substrates
- stable anhydrite floors
- new builds and renovations
Complete system layers
What is included in the Aqua Nature bathroom set
The set is assembled according to the selected area and includes all products needed for the recommended system layers. You do not need to calculate individual layer consumption or combine unrelated materials yourself.
| 1× Primer Plus | unifies absorbency and improves adhesion to the prepared substrate |
|---|---|
| 1× Aqua Base | microcement base layer; another layer can be applied depending on substrate condition |
| 1× Aqua Nature | final decorative microcement with natural concrete appearance |
| 2× Gela Cryl TR100 | closes micropores, unifies absorbency and prepares surface for lacquering |
| 2× 2K PU protection | final protection against water, common dirt and operational wear |
| Total thickness | usually about 2 mm; depending on substrate evenness and preparation approximately 1.5 to 3 mm |
Check substrate readiness before ordering
Open PDF instructionsSignificantly uneven areas, deep joints, damaged tiles or additional levelling may increase Aqua Base consumption above the amount included in the standard set.
Basic overview
How application proceeds in the bathroom
The following steps provide only a brief overview. Always verify exact substrate preparation, sanding, technological breaks, and application method of materials in the current application instructions.
- 01
Substrate and detail inspection
The substrate must be firm, even, stable, dry, and free of active cracks. In the shower, slope, drainage, corners, penetrations and sealing details must be correctly resolved beforehand.
- 02
Primer
Primer Plus is applied with a roller on the prepared and unified surface. The primer must fully dry before the next layer.
- 03
Aqua Base
Base mortar is applied with a steel trowel in a maximum thickness of 1 mm. After drying, the surface is sanded and thoroughly vacuumed.
- 04
Aqua Nature
Final microcement is applied with a trowel in a thin layer. The trowel technique and pressure determine the resulting pattern and surface texture.
- 05
Gela Cryl TR100
After drying and sanding Aqua Nature, two thin layers of acrylic gel are applied to seal micropores and unify the surface.
- 06
Two-component protection
Finally, two even and continuous layers of 2K polyurethane lacquer are applied. Complete coverage is essential in the shower.
Recommended system composition
Primer Plus Aqua Base Aqua Nature 2× Gela Cryl TR100 2× 2K PU protection
Before you start
Start by studying the PDF then watch a practical application video. Open PDF instructions Watch video
Key point of implementation
Details of substrate determine shower success
Microcement is a thin-layer surface finishing and follows substrate behaviour. It will not correct structural movement, active cracks, improperly formed slope or leaking beneath the surface.
In the shower enclosure, drainage connection, penetrations, corners and any structural waterproofing must be correctly resolved before application. Aqua Nature creates a durable final surface but does not replace repairing defective or leaking structural elements.
Do not apply the system on substrates with capillary or residual moisture. Structural and expansion joints must not be overlapped without expert assessment.
Before shower application
Three details that must be resolved beforehand
The final result depends not only on the coating. The shower enclosure must be properly prepared as a whole before opening the first microcement package.
Correct slope
The substrate must drain water towards the outlet. Microcement follows the existing geometry and does not create slope itself.
Drainage, corners and penetrations
Connections of drains, floor traps, taps and other penetrations must be stable, watertight and prepared for surface layer adhesion.
Continuous final protection
Gela Cryl and 2K PU lacquer must cover the entire surface evenly, without missed spots, runs, or prematurely dried joints.
Care and maintenance
How to care for bathroom microcement
Proper maintenance protects the final lacquer and extends the surface lifespan. Clean regularly without aggressive or abrasive products.
Neutral cleaning agents
Use water and gentle cleaners with neutral pH intended for lacquered surfaces for routine maintenance.
Avoid abrasives and wire wool
Avoid abrasive powders, rough sponges, wire wool, strong acids and aggressive solvents.
Regular inspection of details
Check silicone joints, penetrations and around drains. Repair damaged seals before water can get beneath the surface.
Video and application instructions
Watch Aqua Nature system application
The video shows practical work with the materials. Always follow the current PDF application instructions for substrate preparation, layering order, sanding, breaks and lacquering.
Important
The video is an illustrative example. Always comply with the current application instructions during implementation. View PDF instructions
Downloads
Application instructions and technical documents
We recommend reviewing the complete system instructions before starting any work. Technical data sheets for individual materials are also available in the product attachments.
Aqua Nature application instructions
Layer order, substrate preparation, consumption, sanding, drying and final surface protection.
Frequently asked questions
FAQ for the Aqua Nature bathroom set
Is Aqua Nature suitable for direct application in the shower enclosure?
Yes. The complete system with properly prepared substrate, Gela Cryl TR100 and two layers of 2K polyurethane protection is also suitable for shower enclosures and other regularly exposed wet areas.
Is the system suitable for direct contact with water?
Yes. When the entire system is correctly applied, sealed with two layers of Gela Cryl TR100 and two continuous layers of 2K PU lacquer, it is also suitable for shower enclosures. However, construction details, slope, and connection of the drain must be correctly resolved prior to application.
Can microcement be applied over old tiles or flooring?
Yes, provided the substrate is firm, stable, and the individual elements do not hollow or move. The surface must be degreased, properly prepared and joints and unevenness levelled.
Is the set suitable for both walls and floors?
Yes. Aqua Nature can be used on bathroom walls, floors, niches and shower enclosures. When ordering, sum the total area of all parts of the installation.
Is microcement suitable for underfloor heating?
Yes, if the screed is stable, matured and has undergone the prescribed heating cycle prior to application. The substrate must not show active cracks or residual moisture.
What is the thickness of the finished layer?
The total thickness of the system typically ranges from approximately 1.5 to 3 mm depending on the flatness of the substrate and number of preparatory layers.
Is Aqua Nature suitable for DIY application?
Both Aqua Base and Aqua Nature are single-component renders ready to use, which simplifies application. However, for showers and floors it is essential to strictly follow substrate preparation, curing times and apply the final layers without omissions.
How much material should I order?
Add the area of walls, floors, shower, niches and other surfaces. We recommend adding approximately 5 % extra as a reserve. A significantly uneven substrate may require additional Aqua Base beyond the standard set contents.
Does microcement crack?
Microcement as a thin-layer finish follows the behaviour of the substrate. Active cracks, structural movement, unsuitable joints and expansion gaps must therefore be addressed before application.
How is the surface cleaned?
For regular maintenance use water and neutral cleaning agents. Do not use abrasive powders, wire wool, strong acids or aggressive solvents.
Is it possible to locally repair damaged areas?
Minor local damage can usually be repaired without removing the entire surface. However, the repaired area may have a slightly different shade or texture due to the hand-finished effect.
When can the bathroom be used?
Individual layers and the final 2K protection require the prescribed drying and curing time. Always check exact times in the current application instructions and do not stress the surface prematurely.
What exactly was tested under EMICODE EC1 PLUS?
The emission classification was verified on the complete floor system Aqua Nature including relevant layers and final protection. The test report can be provided on request.
Is the video a substitute for the application instructions?
No. The video is a practical demonstration of working with the material. For correct system application always follow the current PDF application instructions.
Order complete system
Select the number of m² and Aqua Nature shade
Choose the variant according to the total area of walls, floors and shower enclosure. The set includes follow-up layers necessary for the recommended application of bathroom microcement.
973 Items
No reviews
Customers who bought this product also bought:
Last items in stock
Last items in stock
Skladem - dodání 1-3 dny
Skladem - dodání 1-3 dny
1 other product in the same category:
Skladem - dodání 1-3 dny
Bathrooms, Shower Enclosures
Bathroom Set - Aqua Nature Microcement
Customers who bought this product also bought:
Skladem - dodání 1-3 dny
Skladem - dodání 1-3 dny
Last items in stock
Last items in stock
Tap to zoom
