Shopping Cart
Floors and vertical surfaces
One system can unify terraces, entrances, outdoor steps, plinths, or adjoining decorative walls.
Outdoor floor and wall set - Aqua Nature microcement
How to order?
- Select the shade of microcement.
- Enter the required coverage in m².
- Add the set to your basket and check the final price including discount.
Quantity discount up to 20% is applied automatically in the basket from 5,000 CZK.
We sell sets exactly according to the required area in m² – you do not pay for excess material unnecessarily.
Complete microcement set from primer to lacquer.
- proven system CimentArt from Spain
- seamless surface without demolition
- suitable also on existing tiles
- complete system including 2K PU lacquer
- low thickness approx. 1.5–2 mm
- Czech technical support
- application videos, manuals, technical data sheets
- certified according to Emicode EC1 PLUS
Not sure about the shade? Buy a ready sample HERE.
Automatická sleva v košíkuMnožstevní sleva až 20 % se odečte automaticky v košíku již od Kč5,000.
Aqua Nature · complete exterior set · floors and walls
Aqua Nature concrete screed for the exterior
Complete CimentArt Aqua Nature microcement system for outdoor floors and walls. It creates a seamless surface with a natural concrete appearance, minimal build-up thickness, and the option to create a subtle anti-slip texture on walking surfaces using a roller.
- For outdoor floors and walls
- Seamless surface without joints
- Option for anti-slip finish
- Complete set by m² quantity
Uniform surface for outdoor spaces
Why choose Aqua Nature for the exterior
Microcement allows you to visually unify outdoor floors, steps, plinths, and adjoining walls with one material solution. The surface has no tiling joints and its final pattern is created by hand with a trowel.
Seamless surface
A continuous surface without a regular grid of joints feels calmer and emphasises the simple exterior architecture.
Optional surface texture
On walking areas, the final layer can be applied with a roller to create a more pronounced texture for better anti-slip properties.
System applications
Where the Aqua Nature exterior set is suitable
The set is designed for solid, stable, and properly prepared outdoor substrates, where a continuous mineral surface with a natural concrete pattern is required.
- terraces and outdoor leisure areas
- balconies with resolved waterproofing and drainage
- outdoor steps and landings
- entrance areas and covered outdoor spaces
- plinths and adjoining vertical surfaces
- garden kitchens and outdoor working walls
- decorative walls, niches and architectural features
- stable concrete and other suitable mineral substrates
Walkable outdoor surfaces
Anti-slip texture can be created with a roller
On terraces, steps, and other walkable areas, the final protective layer can be applied with a roller to create a subtle texture. The surface is less smooth than when finished without visible texture and better meets outdoor usage demands.
Texture depends on application method
The final profile is influenced by the roller type, amount of lacquer applied, pressure and consistency of the work.
Make a sample first
Before covering the entire area, we recommend testing the texture on a sample and checking its appearance and feel underfoot.
No declared slip resistance class
Manual texturing improves surface character but does not constitute a laboratory-certified slip resistance classification.
Important
The anti-slip finish does not replace correct slope, drainage, or regular maintenance. Wet, frozen or dirty outdoor surfaces can still be slippery.
Complete system layers
What the Aqua Nature exterior set includes
The set contains related materials to create a base microcement layer, the final concrete pattern, and double-layer surface protection. Gela Cryl TR100 is not used in this system.
| 1× Primer Plus | unifies absorbency and improves adhesion to the prepared substrate |
|---|---|
| 1× Aqua Base | base microcement layer to unify the surface and create a solid foundation |
| 1× Aqua Nature | final decorative microcement layer with natural mineral and concrete patterns |
| 2× 2K PU lacquer | double-layer final surface protection; on floors a delicate anti-slip texture can be created by roller application |
| Overall thickness | approximately 1.5 to 2 mm depending on substrate flatness and preparation method |
Check conditions before application
Open PDF instructionsOutdoor application requires stable weather, dry substrate and protection of fresh layers against rain, dew, direct sunlight and contamination.
Basic overview
How Aqua Nature exterior application proceeds
The following steps provide a basic overview. Exact technological breaks, sanding, suitable conditions and application methods should always be verified in the current technical datasheets of the individual materials.
- 01
Check structure and substrate
The substrate must be solid, stable, flat, dry, cohesive and free of active cracks. Horizontal surfaces must have slope, waterproofing and drainage resolved in advance.
- 02
Primer Plus penetration
The primer unifies absorbency of the prepared substrate and creates suitable conditions for proper bonding with the Aqua Base layer.
- 03
Aqua Base
The base microcement layer unifies the surface and provides a strong foundation for the final decorative screed.
- 04
Aqua Nature
Final microcement is applied thinly with a steel trowel. The way the trowel is handled determines the final pattern of the floor or wall.
- 05
First coat of 2K PU lacquer
The first protective coat seals the microcement surface continuously and prepares it for the final finish.
- 06
Second coat of 2K PU lacquer
The final coat completes the protection. On walkable surfaces, a textured anti-slip finish can be created by roller application.
Composition of the exterior set
Primer Plus Aqua Base Aqua Nature 2× 2K PU lacquer
Before you start
Plan application for stable weather periods and protect the entire area during drying and curing of the layers. Open PDF instructions Go to video
Critical point in installation
Substrate, water and connection details are key outdoors
Microcement is a thin-layer surface finish that reflects substrate behaviour. Active cracks, structural movement, poorly resolved joints or residual moisture can also appear in the final surface.
Horizontal outdoor surfaces must have functional slope and drainage. Water must not remain on the surface or within the structure long-term. The microcement set does not replace waterproofing, movement joint solutions or repair of unstable structures.
Structural and movement joints must not be overlapped arbitrarily. Edges, penetrations, connections to façades, railings, doors and drainage elements must be resolved before applying decorative layers.
Outdoor application
Protect fresh layers against weather
Outdoor application is more sensitive to ambient conditions than indoor work. Intense sun, rain, dew, wind and rapid temperature changes can affect processing and final appearance.
Work in stable weather
Do not start application if rain, dew, frost or significant temperature changes are expected during drying.
Avoid direct overheating
Heated substrate and direct sunlight can shorten working time and cause uneven curing.
Cover but ventilate the area
Protection against the weather must prevent contact with water and dirt but allow safe ventilation.
Long-term protection
How to use outdoor microcement surfaces
Regular removal of dirt and checking drainage helps preserve appearance and function of the final protective layer.
Remove sand and stones
Coarse dirt can act as an abrasive during walking or furniture movement and gradually damage the protective lacquer.
Keep drainage clear
Regularly check gutters, drains and water outlets to prevent long-standing puddles on the surface.
Clean gently
Use water, a soft brush or mop, and suitable non-abrasive cleaners. Avoid aggressive solvents and abrasive tools.
Video and application procedure
Watch how to work with the Aqua Nature system
The video shows basic work with microcement materials. For exterior applications, it is also necessary to properly resolve substrate, waterproofing, slope, drainage and weather protection of fresh layers.
Important
The video is a general practical demonstration. For the exterior, follow this set composition without Gela Cryl: Primer Plus, Aqua Base, Aqua Nature and 2× 2K PU lacquer. View PDF instructions
Downloads
Application procedure and technical documents
Before carrying out the installation, please study the current application procedure and technical datasheets of all materials used. For outdoor application, also verify the suitability of the specific substrate and construction detail.
Aqua Nature Application Procedure
Basic information on substrate preparation, layer order, sanding, drying and surface finishing.
Frequently Asked Questions
FAQ for the Aqua Nature exterior set
Is this set suitable for outdoor floors and walls?
Yes. The composition is designed for stable and properly prepared outdoor horizontal and vertical surfaces. For floors, sloping, waterproofing and drainage must be properly resolved.
What exactly does the set contain?
The system composition includes Primer Plus, Aqua Base, Aqua Nature and two coats of two-component PU lacquer. Gela Cryl TR100 is not part of this exterior system.
How is the anti-slip finish created?
A fine anti-slip texture can be created by the method of applying the final PU lacquer layer using a suitable roller. We recommend testing the result on a sample beforehand.
Does the surface have a certified anti-slip rating?
No, unless a laboratory report is explicitly provided for a specific variant. Roller texturing improves surface characteristics but does not constitute an official declaration of an anti-slip rating.
Does the set replace waterproofing for balconies or terraces?
No. Microcement is a final surface finish. Waterproofing, slope, drainage, expansion joints and construction details must be properly resolved before applying the set.
Can microcement be applied on old outdoor tiling?
Only after assessing its stability and the entire substrate. The tiling must not be loose, hollow or cracked and the construction must have functional waterproofing, appropriate slope and expansion joint solutions.
Is Aqua Nature suitable for outdoor stairs?
Yes, provided the stairs are stable, correctly sloped and edges, connections and water drainage are properly addressed. A textured finish is recommended on the tread surfaces.
How thick is the final layer?
The total system thickness is usually approximately between 1.5 and 2 mm, depending on substrate flatness and preparation method.
Can the set be applied in any weather?
No. Application requires stable conditions and protection against rain, dew, intense sunlight, wind and unsuitable temperatures during processing and drying.
How is the outdoor surface cleaned?
Regularly remove sand, leaves and other debris. Use water, a soft brush or mop and non-abrasive cleaning agents.
Is the surface completely maintenance-free?
No. Like other outdoor surfaces, it requires cleaning, drainage checks and ongoing inspection of the final protective layer’s condition.
How to calculate the required number of m²?
Add together the area of all floors and walls and add approximately 5% extra. For stairs, edges and complex details, allow for higher consumption.
Order a complete system
Select the number of m² and Aqua Nature shade
Choose the variant according to the total area of outdoor floors and walls. The set contains subsequent layers necessary for the recommended exterior system.
1000 Items
No reviews
1 other product in the same category:
Skladem - dodání 1-3 dny
Tap to zoom
