Shopping Cart
Seamless floor
A continuous surface without tile joints is easier to maintain and visually connects individual rooms.
Aqua Nature Floor Set - Microcement
How to order?
- Select the shade of microcement.
- Enter the required area in m².
- Add the set to your basket and check the final price including discount.
Volume discount up to 20% is automatically applied in the basket from as little as 5,000 Kč.
We sell sets precisely according to the required area in m² – you do not pay unnecessarily for extra material.
Complete microcement set from primer to lacquer.
- Proven system CimentArt from Spain
- Seamless surface without demolition
- Also suitable for existing tiles
- Complete system including 2K PU lacquer
- Low thickness approx. 1.5–2 mm
- Czech technical support
- Application videos, manuals, technical data sheets
- Certified according to Emicode EC1 PLUS
Not sure about the shade? Buy a ready sample HERE.
Automatická sleva v košíkuMnožstevní sleva až 20 % se odečte automaticky v košíku již od Kč5,000.
Aqua Nature · complete floor layering · interior microcement
Concrete screed for seamless floors
Complete CimentArt Aqua Nature microcement system designed for floors in living rooms, kitchens, hallways, bathrooms, and other interior spaces. Creates a seamless surface with a natural concrete look and minimal increase in floor height.
- Complete layer system
- Seamless floor
- Thickness approximately 2 mm
- Entire layering EMICODE ® EC1 PLUS
Main benefits
Why choose a microcement floor
Microcement creates a seamless floor without tile joints. Interiors feel larger, calmer, and visually unified. Thanks to the complete layering and final 2K protection, the surface is ready for everyday wear.
Durability for everyday use
The system finished with two-component polyurethane protection is suitable for living rooms, hallways, kitchens, and other regularly used interior floors.
Renovation without demolition
With proper preparation, the system can be applied over solid ceramic tiles, concrete, or anhydrite without significant floor height increase.
Certified floor layering
EMICODE® EC1 PLUS
Certification applies to the complete CimentArt Aqua Nature floor layering – from preparation and microcement layers to the final surface protection.
Emission test result after 28 days
Measured value < 10 µg/m³ TVOC after 28 days
EC1 PLUS limit ≤ 60 µg/m³ TVOC after 28 days
Less than one-sixth of the allowed limit
The measured total volatile organic compounds were significantly lower (practically zero) than the limit set for the strictest emission class EMICODE® EC1 PLUS.
Test report available upon request.
System usage
Where Aqua Nature is suitable
We recommend Aqua Nature for interiors where the floor should create a continuous and easy-to-maintain surface with a natural mineral and concrete appearance.
- Living rooms and open living spaces
- Hallways, entrance halls and circulation areas
- Kitchens and dining areas
- Bathroom floors
- Bedrooms and studies
- Offices, showrooms and small commercial spaces
- Renovation of solid ceramic tiles
- Stable concrete and anhydrite substrates
Complete layer system
Composition of the Aqua Nature floor system
The floor set is not just a stand-alone decorative screed. It contains complementary products that together form a strong, sealed and long-term protected surface.
| 1x Primer Plus | Unifies absorbency and improves adhesion to the substrate |
|---|---|
| 1x Aqua Base | Base and levelling microcement layer |
| 1x Aqua Nature | Final decorative screed with natural concrete appearance |
| 2× Gela Cryl TR100 | Seals micropores and unifies surface absorbency |
| 2x 2K PU protection | Final protection against wear, water, and everyday dirt |
| Total thickness | Approximately 1.5 to 2 mm depending on substrate evenness |
Study the detailed instructions before application
Open PDF instructions The PDF includes layer order, substrate preparation, recommended sanding, drying times, and important guidelines for correct system execution.
Basic overview
How microcement floor application proceeds
Below is a basic overview of each step. Always verify exact drying times, sanding method, and layer sequence in the current PDF application guide.
- 01
Substrate inspection and preparation
The substrate must be solid, stable, even, dry, and free of dust, grease, loose layers and active cracks.
- 02
Priming
A suitable primer is applied to the prepared substrate to unify absorbency and create conditions for proper bonding with the Aqua Base layer.
- 03
Aqua Base
The base layer unifies the surface and forms a solid foundation for subsequent decorative microcement application.
- 04
Aqua Nature
The final microcement is applied with a steel trowel in a thin layer. The trowelling technique determines the final pattern and floor character.
- 05
Sealing and final protection
After drying and sanding, two coats of Gela Cryl TR100 are applied, followed by the prescribed layers of two-component polyurethane protection.
Recommended system layering
Primer Plus Aqua Base Aqua Nature 2× Gela Cryl TR100 2K PU protection
Before you start
Download the PDF guide and then watch the practical application video. Open PDF instructions Go to video
Critical point of implementation
Substrate stability determines the result
Microcement is a thin layer finish and follows the substrate’s behaviour. Therefore, the substrate must be solid, cohesive, dry and free of active cracks, deflections or movement of separate parts.
Structural and expansion joints must not be covered without assessment. Active cracks, unsuitable joins of different materials, insufficiently cured screeds, or residual moisture may cause defects to transfer to the final surface.
For underfloor heating, the substrate must be stabilised before application and must have completed the prescribed heating cycle. Specific preparation should always be adapted to screed type and floor condition.
Long-term protection
How to use a microcement floor correctly
The microcement floor is durable but, like wooden flooring, vinyl or resin screed, it is not indestructible. Proper use significantly extends the lifespan of the final protective layer.
Protective felt pads
Equip table, chair and furniture legs with good quality, regularly checked felt pads.
Do not drag furniture
Do not drag heavy objects, appliances or furniture across the floor. Use suitable protective underlays when moving.
Limit sand and coarse dirt
Use mats in entrance zones. Sand and small stones can act like abrasives when walked on.
Video and application guide
Watch the Aqua Nature system application
The video shows practical work with individual materials. For correct substrate preparation, layer sequence, sanding and drying times, always follow the current PDF application guide.
Important
The video is a demonstrative example. Always follow the current PDF application instructions during execution. View PDF instructions
Downloads
Application guide and technical documents
Before starting the project we recommend studying the full system application guide. Technical data sheets, manuals and other documents can be found in the product attachments.
Aqua Nature application guide
Detailed guide for substrate preparation, layer sequence, sanding, drying and surface finishing.
Frequently asked questions
FAQ for Aqua Nature microcement floor
Is Aqua Nature suitable for floors?
Yes. The system includes base microcement layers, pore filler and final two-component polyurethane protection designed for normal mechanical and operational load on interior floors.
What does the EMICODE® EC1 PLUS classification cover?
Classification covers the complete floor layering, not just the decorative screed Aqua Nature itself.
Can microcement be applied on old tiles?
Yes, if the tiles are solid, stable and do not creak. The surface must be thoroughly degreased, roughened and joints and other unevenness levelled.
Is microcement suitable for underfloor heating?
Yes, with a properly designed and stable substrate. The screed must be cured and the prescribed heating cycle completed before application.
Does a microcement floor crack?
Microcement, as a thin-layer finish, follows the substrate behaviour. Active cracks, unsuitable joints and expansion gaps must be resolved before application.
How resistant is the surface to scratching?
The final 2K polyurethane protection is highly resistant to everyday wear. However, the surface is not indestructible. We recommend using protective felt pads, entrance mats, and avoiding dragging furniture across the floor.
How is the microcement floor cleaned?
For regular maintenance, use water and neutral cleaning agents. Avoid abrasive powders, steel wool, and aggressive solvents.
How thick is the final layer?
The overall system thickness typically ranges from approximately 1.5 to 3 mm, depending on the flatness and preparation method of the substrate.
Is Aqua Nature suitable for DIY application?
Aqua Nature is a single-component trowel-ready product, which simplifies application. However, for floors, it is essential to strictly follow substrate preparation, layering sequence, and to work without unwanted interruptions over the surface.
Can the surface be repaired locally?
Minor local damage can generally be repaired without removing the entire floor. However, due to manual application, the repaired area may have a slightly different appearance.
When can the floor be used?
Each individual layer and the final polyurethane protection require the prescribed drying and curing time. Exact times are given in the current application instructions.
Is the video a substitute for the application instructions?
No. The video serves as a practical demonstration of working with the material. Always follow the current PDF application instructions for correct system installation.
Ordering the complete system
Select the number of m² and the Aqua Nature shade
Choose the variant based on the size of the area being completed. The set includes all subsequent layers needed for the recommended microcement floor application.
1000 Items
No reviews
Customers who bought this product also bought:
Skladem - dodání 1-3 dny
Sample Boards
Aqua Nature Microcement Sample Boards
1 other product in the same category:
Skladem - dodání 1-3 dny
Floors, Stairs
Aqua Nature Floor Set - Microcement
Customers who bought this product also bought:
Skladem - dodání 1-3 dny
Sample Boards
Aqua Nature Microcement Sample Boards
Tap to zoom
