Shopping Cart
Flexible stainless steel blade
The tempered stainless steel blade, 0.3 mm thick, applies even pressure and adapts well to the surface.
Silver Lisse - French Trowel for Microcement
Professional French stainless steel trowel Silver Lisse for applying and smoothing microcement on walls and floors. The flexible 0.3 mm thick blade with rounded corners reduces scratches and edge marks. Available in widths from 12 to 120 cm, with quick blade replacement without tools.
Automatická sleva v košíkuMnožstevní sleva až 20 % se odečte automaticky v košíku již od Kč5,000.
OCAI Silver Lisse · microcement trowel · widths 12 to 120 cm
Stainless steel Silver Lisse trowel for microcement
Professional flexible trowel for applying and smoothing microcement on walls and floors. The thin stainless steel blade with rounded corners adapts to the surface, limits visible edge marks and facilitates creating an even hand-drawn texture.
- Flexible 0.3 mm stainless steel blade
- Rounded corners to prevent scratches
- Widths from 12 to 120 cm
- Tool-free blade replacement
Professional tools
Faster application with fewer marks
The Silver Lisse design is created for smooth spreading of thin-layer materials. The flexible blade follows the surface and the rounded edges reduce the risk of sharp scratches, unwanted ridges and noticeable transitions between strokes.
Rounded corners
Rounded edges limit material build-up and sharp marks that would require sanding afterwards.
Wide range of widths
From 12 cm for details up to 120 cm for fast processing of large walls and floors.
Usage in application
For applying and smoothing microcement
The Silver Lisse trowel can be used for applying both base and finishing layers of microcement. Its greatest benefit is on smooth, continuous surfaces where it allows covering a larger area with a single stroke.
- application of microcement on decorative walls
- spreading microcement on floors
- smoothing the base layer Aqua Base
- applying and finishing Aqua Nature
- unifying larger continuous areas
- working on walls using a telescopic pole
- processing corners and details with smaller sizes
- reducing visible tool edge marks
10 sizes available
Choose width based on the area size
Smaller trowels are suitable for corners, reveals and detailed areas. Wider versions speed up application on long walls, floors and other open surfaces.
| Order code | Width | Recommended application |
|---|---|---|
| 0850 | 12 cm | corners, niches, reveals and local details |
| 0851 | 15 cm | details and smaller complex areas |
| 0852 | 20 cm | small walls, furniture and narrow areas |
| 0853 | 30 cm | universal size for usual manual application |
| 0854 | 40 cm | walls, kitchen backsplashes and medium-sized areas |
| 0855 | 50 cm | fast processing of larger walls |
| 0856 | 60 cm | large walls and open floor areas |
| 0857 | 80 cm | large surface application and work with telescopic pole |
| 0858 | 100 cm | extensive flat walls and floors |
| 0859 | 120 cm | maximum working width for large surfaces |
Tool construction
Technical specifications Silver Lisse
| Blade | tempered stainless steel |
|---|---|
| Blade thickness | 0.3 mm |
| Edge finishing | rounded edges to reduce marks and scratches |
| Handle | ergonomically shaped PVC |
| Blade replacement | tool-free, three-step locking system |
| Available widths | 12, 15, 20, 30, 40, 50, 60, 80, 100 and 120 cm |
| Telescopic pole | compatible with OCAI Expert 405431 pole via adapter 0902 |
| Made in | France |
Basic working procedure
How to work with the trowel when applying microcement
The resulting microcement texture depends on the amount of material, trowel angle, pressure and stroke direction. We recommend testing the tool on a sample or small trial area before application.
- 01
Choose a suitable width
Use a smaller trowel for intricate areas. On large flat walls and floors, use a wider version.
- 02
Apply an appropriate amount of material
Spread microcement evenly over the working area, avoiding unnecessarily thick layers on the surface.
- 03
Move the trowel in a smooth stroke
Work at a slight angle and maintain consistent pressure. Excessive pressure may remove too much material.
- 04
Overlap fresh material
Overlap strokes before edges dry to avoid visible seams.
- 05
Clean the blade regularly
Dried particles on the blade can cause scratches. Check and wipe the blade frequently during work.
Suitable use within the CimentArt system
Aqua Base Aqua Nature Aqua Microconcrete decorative walls floors
Tool-free
Three-step blade replacement
1. Open the upper part of the handle. Pressure holding the stainless steel blade releases.
2. Remove the old blade and insert the new one. Check the blade is straight and properly seated along its entire length.
3. Close the handle and secure the blade. Ensure it is firmly fixed before use.
Work without scaffolding or bending
Option to attach telescopic pole
Using the OCAI 0902 adapter, the trowel can be attached to the Expert 405431 telescopic pole. This solution facilitates working on high walls, ceilings and large floor areas.
- higher reach on walls
- faster work on large surfaces
- less back strain when working on floors
- anti-slip coating on telescopic pole
- trowel, adapter and pole must be ordered separately
Tool care
A clean blade is the foundation of a quality surface
Even a small dried particle can cause a visible scratch on the next stroke. Clean the trowel immediately after use and regularly check the blade edge during application.
Clean immediately after use
Do not allow microcement to cure on the blade or inside the holder area.
Do not use as a scraper
The thin flexible blade is not designed for removing hardened material or rough unevenness.
Protect the working edge
Store the trowel so the blade is not bent and does not contact sharp or abrasive objects.
Frequently asked questions
FAQ about the Silver Lisse trowel
Is Silver Lisse suitable for microcement application?
Yes. The flexible stainless steel blade allows applying and smoothing thin microcement layers on walls and floors.
What size to choose for general use?
For general manual use, we recommend widths around 30 to 50 cm. Smaller sizes are suited for detail work, while widths of 60 cm and above are intended for large flat surfaces.
Does Silver Lisse replace a traditional Venetian trowel?
Not in all cases. Silver Lisse is excellent for quickly spreading and smoothing larger areas. A traditional trowel offers more precise control in corners, details and when creating specific hand textures.
Why does the blade have rounded corners?
Rounded corners reduce the risk of the tool edge creating a sharp scratch or visible transition in fresh microcement.
Can the blade be replaced separately?
Yes. The handle opens, a new blade is inserted into the holder and secured by closing the handle. No tools are required for replacement.
Can the trowel be fixed to a telescopic pole?
Yes. A separate adapter 0902 is required to connect to the OCAI Expert 405431 telescopic pole.
Is the widest trowel suitable for beginners?
Widths from 80 to 120 cm require even pressure along the entire length and more experience. For initial applications, sizes 30 to 50 cm are more practical.
How to prevent scratches during application?
Keep the blade perfectly clean, work smoothly and regularly check that no dried material particles remain on the edge.
Professional microcement tool
Choose the desired trowel width
Select the size according to the complexity and size of the surface to be applied. For general manual application, we recommend widths of 30 to 50 cm.
0852
32 Items
No reviews
6 other products in the same category:
Skladem - dodání 1-3 dny
Out-of-Stock
Skladem - dodání 1-3 dny
Skladem - dodání 1-3 dny
Last items in stock
Skladem - dodání 1-3 dny
Tap to zoom
