Kitchen Set - Aqua Nature Microcement

How to order?

  1. Select the shade of microcement.
  2. Enter the required area in m². Add the
  3. set to your basket and check the final price including discount .Quantity discount up to 20%

is applied automatically in the basket from £170. Sets are sold exactly according to the required area in m² – you only pay for the material you need.

Complete microcement set from primer to varnish.


Proven system

  • CimentArt from Spain seamless surface without demolition VLAJKA.png
  • suitable also for existing tiles
  • complete system including 2K PU varnish
  • low thickness approx. 1.5–2 mm
  • Czech technical support
  • application videos, manuals, technical data sheets
  • certified according to Emicode EC1 PLUS
  • Not sure about the shade?

Buy a ready-made sample HERE. Aqua Nature · complete kitchen set · microcement for walls and backsplashes

Odstíny Aqua Nature
Vybraný odstín: 29. Soft Lime

  • 1. Off White 1. Off White
  • 2. Pearly 2. Pearly
  • 3. Ivory 3. Ivory
  • 4. Soft Grey 4. Soft Grey
  • 5. Light Concrete 5. Light Concrete
  • 6. Concrete Grey 6. Concrete Grey
  • 7. Steel Grey 7. Steel Grey
  • 8. Graphite Grey 8. Graphite Grey
  • 9. Light Anthracite 9. Light Anthracite
  • 10. Dark Anthracite 10. Dark Anthracite
  • 11. Travertine 11. Travertine
  • 12. Cashmere 12. Cashmere
  • 13. Warm Stone 13. Warm Stone
  • 14. Sand Stone 14. Sand Stone
  • 15. Autumn 15. Autumn
  • 16. Tuscany 16. Tuscany
  • 17. Salmon 17. Salmon
  • 18. Clay Rose 18. Clay Rose
  • 19. Clay Brick 19. Clay Brick
  • 20. Bordeaux 20. Bordeaux
  • 21. Apple Green 21. Apple Green
  • 22. Blue Mint 22. Blue Mint
  • 23. Sky Blue 23. Sky Blue
  • 24. Pistachio 24. Pistachio
  • 25. Khaki 25. Khaki
  • 26. Lavender Grey 26. Lavender Grey
  • 27. Ochre Sand 27. Ochre Sand
  • 28. Cream Yellow 28. Cream Yellow
  • 29. Soft Lime 29. Soft Lime
  • 30. Deep Fjord 30. Deep Fjord

Nevybrali jste si žádný odstín? Napište nám Vaši představu, a my Vám navrhneme řešení.

Skladem - dodání 1-3 dny
Kč890
VAT included

Automatická sleva v košíkuMnožstevní sleva až 20 % se odečte automaticky v košíku již od Kč5,000.
✓
Od roku 2010 specializace na mikrocement
✓
20 000 m² ročně v ČR ověřený systém v ČR
✓
Sklad v ČR rychlé dodání
✓
Česká technická podpora email, telefon, WhatsApp
 

Concrete skim for kitchen without joints

Complete CimentArt Aqua Nature microcement system for kitchen backsplashes, walls behind worktops, and other decorative surfaces. It creates a seamless surface without tile joints, easy to maintain and resistant to water, grease, and everyday kitchen use.

Complete set by number of m²

  • Seamless surface
  • Ready-to-use skim
  • Final protection with 2K PU varnish
  • Quick response

Why choose microcement for the kitchen

Microcement replaces traditional tiling with a continuous, joint-free surface. The kitchen appears cleaner and calmer, and the backsplash is easy to maintain even in areas exposed to water, steam, grease and typical dirt.

01

No greasy or clogged joints

The continuous surface has no tile joints where dirt, grease and cooking residues usually accumulate.

02

Durability for daily use

A sealed system with two-component polyurethane varnish protects the surface from water, grease, stains and common cleaning agents.

03

Refurbishment without tile demolition

With proper preparation, microcement can also be applied over solid, stable ceramic tiles without unnecessary demolition work.

Proven system composition

EMICODE

®EC1 PLUS The complete tested Aqua Nature system was certified with EMICODE

®EC1 PLUS. The test included all microcement layers and the final surface protection. Complete tested composition


Exceptionally low VOC emissions Suitable for residential interiors Emission test result after 28 days
Measured value
< 10 µg/m³ TVOC after 28 days EC1 PLUS limit
≤ 60 µg/m³ TVOC after 28 days Less than one-sixth of the permitted limit
The measured total volatile organic compounds value was significantly lower than the limit set for EMICODE

®EC1 PLUS. Measurement report available on request.

System use

Where the Aqua Nature kitchen set is suitable

The set is designed primarily for vertical kitchen surfaces where you want to replace tiles with a modern, continuous surface with a fine mineral texture.

kitchen backsplashes behind worktops

  • walls between lower and upper cabinets
  • around sinks and preparation zones
  • walls in dining areas
  • niches and decorative kitchen surfaces
  • solid plaster and skimmed bases
  • stable plasterboard structures
  • solid ceramic tiles after proper preparation
  • Fine mineral texture

What the Aqua Nature kitchen set contains

The set is not only decorative skim. It contains all subsequent materials needed to create a strong, sealed and easily maintained kitchen surface.

Aqua Nature kitchen system composition

1× Primer Plus
primer to unify absorbency and improve adhesion to the prepared substrate 1× Aqua Base
base microcement layer to unify the surface and create a solid foundation 1× Aqua Nature
final decorative microcement with fine mineral texture 1× Gela Cryl TR100
sealing micropores, unifying absorbency and preparing the surface for varnishing 2× 2K PU varnish
final protection against water, grease, stains and typical kitchen use Total thickness
approximately 2 to 3 mm depending on substrate flatness and preparation method Choosing the variant
The PDF contains layer order, substrate preparation, recommended sanding, drying times and important guidelines for correct system application.

Open the PDF instructions

Basic overview

How the kitchen backsplash is applied

The following steps are a brief overview. Exact drying times, sanding and material sequencing should always be verified in the current application instructions.

01

  1. Substrate inspection and preparation

    The substrate must be solid, cohesive, flat, dry and free from dust, grease, silicones, loose layers and active cracks.

    02

  2. Priming

    Apply Primer Plus to the prepared substrate to unify absorbency and improve bonding with Aqua Base underneath.

    03

  3. Aqua Base

    The base microcement layer unifies the surface and creates a solid foundation for the final decorative skim.

    04

  4. Aqua Nature

    The final microcement is applied with a steel or plastic trowel in a thin layer. The direction of the trowel determines the surface pattern.

    05

  5. Sealing and final protection

    After drying and sanding, Gela Cryl TR100 is applied followed by two layers of two-component polyurethane varnish.

    Recommended system composition

Primer Plus
Aqua Base Aqua Nature Gela Cryl TR100 2× 2K PU varnish Before you start
Download the PDF instructions and then watch the practical application video.
Open the PDF instructions Go to video Critical point in the process

A well-prepared substrate decides the outcome

Microcement is a thin surface coating and replicates the condition of the substrate. Unevenness, movement, cracks or poorly repaired joints may show through the final surface.

The original ceramic tiles must be firmly fixed and not hollow. The surface must be thoroughly degreased, roughened and joints levelled so their pattern does not imprint on the microcement.

Junctions at the worktop, sink, sockets and other penetrations must be technically resolved prior to finishing. Flexible joints should be made with appropriate sanitary or construction sealant according to the specific detail.

Cleaning and long-term protection

How to correctly use microcement in the kitchen

The final 2K protection creates a sealed and easy-to-clean surface. Proper cleaning and gentle use help maintain appearance and functionality of the protective layer.

01

Remove dirt promptly

Do not allow grease, sauces, coffee or coloured foods to dry on the surface unnecessarily.

02

Use neutral cleaning agents

For routine cleaning, a soft sponge or cloth, water and a non-abrasive detergent with neutral pH are sufficient.

03

Avoid direct high heat

The surface near open flames and very hot objects must be protected according to your kitchen’s specific design.

Video and application instructions

Watch the Aqua Nature system application

The video shows practical work with the materials. Always follow the current PDF application instructions for surface preparation, layer sequencing, sanding and drying times.

▶

The video is a demonstration. Always follow the current PDF application instructions during installation.
View PDF instructions Downloads

Application instructions and technical documents

Before starting, we recommend studying the entire system’s application instructions. Technical data sheets for Aqua Base, Aqua Nature and other relevant documents are available in the product attachments.

PDF

Detailed guidelines for substrate preparation, layer order, sanding, drying and finishing.

Open application instructions

Frequently asked questions

FAQ about Aqua Nature microcement in the kitchen

Is Aqua Nature suitable behind the kitchen worktop?

Yes. The complete system with pore sealing and final two-component varnish creates an easy-to-clean surface resistant to water, grease and typical kitchen dirt.

Can microcement be applied over existing tiles?

Yes, if the tiles are firmly fixed, not hollow and the substrate is stable. The surface must be degreased, roughened and joints and any unevenness smoothed before application.

Is the surface truly joint-free?

Yes, microcement is applied as a continuous coating without traditional tile joints. However, construction and flexible joints must remain correctly technically resolved.

Is microcement resistant to grease and stains?

After proper curing of the final 2K varnish, the surface is resistant to common grease, water and stains. Nevertheless, contamination should be removed without delay.

Can Aqua Nature be used behind a hob?

Can Aqua Nature be used behind a hob?

Yes, provided a safe distance and the technical requirements of the hob manufacturer are observed. In the immediate vicinity of an open flame or exceptionally high temperatures, appropriate thermal protection must be chosen.

How is a microcement splashback cleaned?

Use a soft cloth or sponge, water, and a neutral non-abrasive cleaning agent. Do not use wire wool, abrasive powders, or harsh solvents.

What thickness is the final layer?

The total system thickness usually ranges approximately between 2 and 3 mm, depending on the evenness and preparation method of the substrate.

Is the screed ready to use?

Yes. Both Aqua Base and Aqua Nature are single-component screeds supplied in a paste consistency. They only need thorough mixing before application.

How to calculate the required number of square metres?

Multiply the width and height of all planned areas and then add the results. Also include niches, edges, and other adjoining parts. We recommend adding approximately 5% for reserve.

Is the set suitable for DIY application?

Yes, the ready-to-use materials simplify application. However, it is essential to strictly follow the substrate preparation, sanding, technological pauses, and the method of applying individual layers.

Can the surface be locally repaired?

Smaller local damage can usually be repaired without removing the entire area. Due to the hand-drawn effect, the repaired spot may have a slightly different appearance.

When can the surface be used normally?

The final polyurethane lacquer requires the prescribed curing time. Full loading is recommended only after complete curing according to the current technical and application guidelines.

Ordering a complete system

Select the number of square metres and the Aqua Nature shade

Choose the variant according to the size of the kitchen splashback or other completed areas. The set includes subsequent layers necessary for the recommended application.

1000 Items
No reviews

Customers who bought this product also bought:

1 other product in the same category:

Customers who bought this product also bought: