Microfibre Roller 250 mm for Microcement Lacquering

Microfibre Roller for Microcement Lacquering 250 mm

Microfibre roller 250 mm designed for the even application of final lacquers on microcement and concrete screed.

Thanks to the fine microfibre, it holds the material well, helping to create a continuous layer without unnecessary marks and is suitable for lacquering larger surfaces such as floors, walls or bathrooms.

suitable for polyurethane and acrylic lacquers,
ideal for lacquering microcement and concrete screed,
width 250 mm for quick work on larger areas,
helps apply an even protective layer,
suitable for final surface protection against water, dirt and everyday wear.

Skladem - dodání 1-3 dny

Kč108

VAT included

Automatická sleva v košíkuMnožstevní sleva až 20 % se odečte automaticky v košíku již od Kč5,000.

✓

Od roku 2010 specializace na mikrocement

✓

20 000 m² ročně v ČR ověřený systém v ČR

✓

Sklad v ČR rychlé dodání

✓

Česká technická podpora email, telefon, WhatsApp

Microfibre Roller for Microcement 250 mm

Professional microfibre Ocryl roller 8 mm designed for the application of primers, acrylic gels, lacquers and protective layers in microcement systems. Thanks to the woven polyester microfibre, it spreads material well, does not shed fibres and helps create an even final surface.

roller width 250 mm
diameter 47 mm
pile height 8 mm
woven polyester microfibre
suitable for primers, lacquers and coatings

Clean application without fibre shedding

The roller is suitable for finishing work where an even application and a clean finish without fibres released into the surface are important.

8Pile 8 mm

universal application

✓Microfibre

woven polyester

📏250 mm

roller width

Ø47 mm

roller diameter

⚙Thermofusion

firm fibre bonding

Main Benefits

Even application

The microfibre picks up and releases the material well, helping to create a continuous and uniform layer without noticeable roller marks.

Suitable for system layers

Ideal for applying primers, lacquers and other protective or preparatory layers in microcement systems.

No fibre shedding

The woven microfibre and firm bonding help limit fibre release into the applied material.

Fast work over large areas

The 250 mm width is suitable for efficient application on walls, floors and larger continuous surfaces.

Roller specifications

Width250 mm
Diameter47 mm
Pile height8 mm
Materialwoven polyester microfibre
TechnologyThermofusion

Recommended use

application of primers
application of lacquers and protective coatings
painting work on walls and ceilings
even application on smooth and finely textured surfaces

Recommended procedure

How to use the roller

Correct use of the roller affects material consumption, evenness of application and the final surface appearance.

Prepare the roller

Before first use, remove dust and any loose particles from the roller.

Evenly saturate it

Work the material well into the roller, but avoid overloading it with excess material.

Work continuously

Apply the material with smooth strokes, maintaining a wet edge to avoid overlap marks.

Even out the surface

After spreading the material, lightly smooth the surface with final strokes in one direction.

Clean after use

If the used material allows, thoroughly rinse the roller immediately after use.

Store dry

After cleaning, leave the roller to dry completely to retain its shape and function.

Practical tip: Always use a clean roller without dried material residues for lacquers and final protective layers. Clean tools are essential for finishing coats.