Microfibre Roller - for Applying Varnishes and Sealers

Professional roller for microcement topcoats

The quality of the final varnish significantly affects the appearance and durability of the microcement surface. This microfibre roller with 10–12 mm fibre length is intended for applying protective varnishes, sealers and primers to concrete screeds and microcement.

The fine microfibre helps to spread the coating evenly, limits streaks, blotches and foaming, and makes it easier to create a continuous protective layer.

With four available widths, you can choose the appropriate roller for details, bathrooms, walls or larger floor areas.

Which roller size to choose?

Choosing the correct roller width makes application easier and helps better control the amount of material applied.

How to use the roller correctly

Before first use, we recommend removing any loose fibres from the roller surface using adhesive tape or rinsing the roller according to the intended application.

Apply varnish with smooth strokes without unnecessary pressure. Work systematically by overlapping onto the freshly applied coat to avoid visible transitions on the surface.

After finishing, clean the roller immediately according to the instructions of the varnish or sealer manufacturer used.

Why is the correct roller important?

For microcement, the protective varnish forms the last visible layer of the system. Using an inappropriate roller or incorrect application can cause foaming, blotches, scratches or visible joins between strokes.

Fine microfibre enables better control of the coating and helps create an even and professionally finished surface.